Our packages are a great way to get you started with ClosetMaid.
They include all of the shelving and hardware that you need to create a wardrobe as illustrated in the design pictures above. Packages are delivered flat packed, with assembly instructions, labelled hardware, and informative diagrams for easy installation.
This package uses the ClosetMaid SuperSlide style of shelving, with Adjustable ShelfTrack Hardware. The package will include:
2 x Full width shelves for flat and folded items
1 x Long hanging section for robes and drying, up to 0,61m/ 2' wide
2 x Shelves for folded items and cleaning goods, 1,22m/ 4' wide
2 x Smaller shelves for flat and folded items up to 0,61m/ 2' wide
1 x Set of four ShelfTrack drawers
The ShelfTrack drawers included in the package comprise of one 8cm/ 3.2" deep drawer, three 18cm/ 7" deep drawers, drawer stops, runners, and mesh shelves on top of each drawer which can act as further shelving depending on spacing between each drawer. The drawers are 53cm/ 21" wide and 43cm/ 17" deep.
If you have less than 1,83m/ 6' wide, then you can trim the shelving down to suit your exact measurements with a hacksaw or boltcutters. This will allow you to create the perfect fit for your wardrobe.
You can choose the depth of your shelving from the options above, as well as the wall construction which is required so that we can ensure we send you the correct hardware. All hardware is only mounted to rear wall. Note that we recommend a minimum depth of 56cm/ 22" to allow for the overall depth of the baskets once mounted, and any hanging garments. 61cm/ 24" is optimum depth.
Stud Walls - We will provide toggle bolt hardware which does not require fixing directly to the studs.
Solid Walls - We will provide screws with anchors/ rawl plugs, you can also use these fixings with stud walls if you are fixing directly into wooden studs.