Walk in closet layout 7, 2.44m / 8' square

Zoom

Brand:  ClosetMaid
Choose the most suitable size of your enclosure:  8' x 8' (2.44m x 2.44m)

Availability:

Tweet

Brand New to Organise My Home is this fantastic walk in closet kit 7.

* Limited special offer! * - For a limited time, with every walk in closet 7, we're offering one of our total wardrobe system hanger sets, and three packs of our gorgeous flock trouser pin hangers FREE!

Designed to suit any walk in enclosure up to 8' / 2.44m square, walk in closet 7 has everything you need to install your closet as shown in the pictures!
Created using our 12" (30.5cm) deep SuperSlide shelving, our walk in closet kits are great for turning a spare room or a plain dressing room into a fabulous, fully functional walk in closet at a great price.

In this package you will receive everything required to create the following:

•Along the back wall there is a central shelf stack, 24" (61cm) wide. This section will be ideal for folded garments, linens and accessories.
•To the left of this section we have included a 36" (91cm) wide section of two tier hanging for short garments such as blouses, shirts, jackets etc. The hang bars are connected to our SuperSlide corner hanger bars, which take the section around the corner onto the side wall without interruption!
•To the right of the shelf stack we have included a 36" (91cm) wide section of long hanging space for dresses and overcoats etc. There is also an additional shelf above, along with a shoe rack below, capable of holding 3 - 4 pairs of shoes.
•Along the left hand side wall, shown in image three, we have included a further two tier hanging section for short garments. This section follows on from the back wall using our SuperSlide Corner hanger bar.
•Along the right hand side wall, shown in image four, we have included a further long hanging section with shelves above for dresses and overcoats. This section also continues from the back wall using our SuperSlide Corner hanger bar. You also get a further shoe rack which will hold 8 - 10 pairs of shoes.
The design requires fixing to three adjacent walls, as shown. The ends of the shelves on the side walls will fix to a fourth wall where available, however if you do not have a fourth wall to fix to, due to the position of your entry way etc, do please let us know so that we can be sure to send the correct hardware.
If we are not made aware of the requirements for hardware in the event you do not have a fourth wall, we will assume that you do have a fourth wall to fix to and send the appropriate hardware.

Please note that as our innovative Walk in Closet systems are made from strong steel wire with a white vinyl finish to increase durability and prevent rust, it means that you are able to trim the shelving down to suit exact measurements if your enclosure is slightly smaller than 8' / 2.44m square! Just use boltcutters or a hacksaw to trim the shelving and use the plastic end caps (included) to cap cut ends.