Walk in closet layout 5, 2.44m / 8' square

Zoom

Brand:  ClosetMaid
Choose the most suitable size of your enclosure:  8' x 8' (2.44m x 2.44m)

Availability:

Tweet

A great layout for people who like their gadgets! This walk in closet offers space for your folded garments, shoes, underwear, short hanging garments, and three quarter length hanging garments, but it also gives you a tie and belt rack and hanging baskets, which are great for storing hair brushes etc turning your walk in wardrobe into a real dressing room!

This layout gives you a 213cm / 84" wide section of two tier hanging for short hanging garments along the left hand wall, which continues around the corner onto the back wall to give you a further 91cm / 36" wide section of two tier hanging. You then have a 61cm / 24" wide shelf stack with a 48cm / 19" wide drawer system below. Next to this you have a further 91cm / 36" wide section of two tier hanging, which continues around the corner onto the right hand side wall. Along the right hand side wall you have a further 91cm / 36" wide section of double hanging and a 122cm / 48" wide section of three quarter length hanging with three 122cm / 48" wide shoe shelves below.

The 48cm / 19" wide drawer system comprises of one triple depth drawer (28cm / 11" deep) and two double depth drawers (18cm / 7" deep), a plastic moulded top, floor protector caps and drawer stops. The system stands at 48cm / 19" wide, 76cm / 30" high and 58cm / 23" deep.

This layout uses our 30.5cm / 12" deep SuperSlide shelving (also available in 40.6cm / 16" deep) and also provides you with a sliding tie and belt rack, and 8 hanging baskets.

To make the most of your two tier hanging we suggest you place the top shelf at 213cm / 84" above the floor, therefore the system will work best if you a minimum ceiling height of 216cm / 85".

Is your room not quite 8' square? Dont worry, because our systems are adjustable and by using a pair of boltcutters or a hacksaw, you can cut down your shelving to fit the exact measurements of your room!

This layout utilises three walls to fix to; two side walls and the rear wall of the room or enclosure. Ordinarily there will be a fourth/front wall (which has been made transparent in the picture for viewing purposes), but sometimes the room/enclosure configuration means that there may not be a front wall at all or there may only be part of a wall. We want to make sure that we send you the correct components so that you can install your walk in closet properly, so, please make sure that you select the correct option, explaining the configuration of the fourth/front wall, as viewed from the outside working left to right.