1166 - Shelf support bracket, 40.6cm / 16" position

Zoom

Brand:  ClosetMaid

Availability:

Tweet

The 16" position shelf brackets are for use with the following:

16" (25.4cm) deep Shelf & Rod shelving, only for use at the ends of the shelf, if creating a floating shelf. If your shelf is more than 36" (91.4cm) wide, then you must also use at least one shelf support bracket of a 10" or 12" position, depending on the position of the hang bar.

16" (40.6cm) deep SuperSlide shelving. If using a hang bar, 16" brackets will only be needed at the ends of the shelf when creating a floating shelf. If you shelf is 36" (91.4cm) wide or more then you will need to use 1164 - 12" position support brackets as well.

16" (40.6cm) deep Linen & CloseMesh shelving.

The shelf support brackets are needed to support the shelf and therefore you would need one every 36" (91.4cm) along the shelf's length, and also one at each end if you are creating 'open ends' or floating shelves, where 1009 - shelf support poles, or 974/980 - wall brackets have not been used 

Please note that the length of the actual bracket is NOT 16" (40.6cm). As the bracket sits at an angle, it is longer than the shelf depth that the bracket is used to support. Therefore if ordering any replacements or additional supports, please double check that you order the bracket based on the position and not the physical length of the bracket.
A 1166 (16" position) bracket is actually 19" (48.3cm) long. 

Customers who bought this item also bought:

991 - Wall clips £0.30

203 - small plastic end caps £0.06