This kit provides everything you need to install a 12" (30.5cm) deep 'Low Profile' style Linen shelf in your chosen length using our Fixed Mount system.
This item will NOT work with our ShelfTrack system.
The shelf will install to solid brick walls, or stud plasterboard, and will also fix to wood, which is at least 1" (2.54cm) thick.
The shelf is made from steel wire, with a white vinyl coating and is ideal for storing linens, allowing air to circulate around them with its mesh design. You can also use it for storing household cleaning goods, books...pretty much anything you can think of!
Available in the following lengths;
61cm (2')
91cm (3')
122cm (4')
183cm (6')
The shelves can be cut trimmed down to the exact size you require using boltcutters or a hacksaw. The cut ends will be covered by small plastic end caps provided in the shelf kit.
Each shelf is sold separately.
Shelf is installed using wall clips along the back edge of the shelf, and end brackets which will either mount to side walls where available or onto the back wall where side walls are not available.
Please select the available side walls that you have to fix to using the options above, so that we can send you the correct hardware.
Wall - wall indicates side walls at each end.
Wall - open indicates a wall on the left side of the shelf but not the other.
Open - wall indicates an 'open end' and a side wall at the right end.
Open - open indicates that only the back wall is available to fix to, and no side walls are present.
Please note that any available side walls must be at least 35cm (14") wide to accommodate the side wall brackets.
ALL images are shown with 'Open to Open' fixings!
