Reach in Closet layout 7, 2.44m / 8' wide

Zoom

Brand:  ClosetMaid
Choose the most suitable size of your enclosure:  8' (2.44m) Wide

Availability:

Tweet

This reach in closet layout gives you lots of spce for your long garments. With no separate section for your short hanging garments you can use this closet just for your long hang or use it for both! Ideal for people who tend to have more long hang, or like to hang their trousers up by the waistband etc!

In a 2.44m / 8' width this closet will give you a 183cm / 72" wide section of hanging and a 61cm / 24" wide section of shelving for your folded garments and a drawer system below for your underwear etc.

The drawer system comprises of a triple depth (28cm / 11" deep) drawer, two double depth (18cm / 7" deep) drawers, a plastic moulded top, drawer stops and floor protector caps. The system stands at 76cm / 30" high, 48cm / 19" wide and 58cm / 23" deep.

This layout uses our 30.5cm / 12" deep SuperSlide shelving. We recommend that when purchasing this layout, you ensure you have a ceiling height of at least 216cm / 85" to allow for your garments to hang properly and for you to fit in all of the shelves shown. We also recommend that you have a minimum closet depth of 55cm / 22" to allow for your garments to hang properly.

 Our systems must attach to the back wall but will attach to side walls if they are available. Our drawings are shown with both side walls but some people will not have these walls to fix to, and therefore we need to know which wall(s) are available so that we can send the correct components so that you can install your closet properly. Please select the correct option from the menu, which best describes the availability of your side walls as though facing your closet enclosure working left to right.

If your space is not quite 8' wide then dont worry as our systems are adjustable. Our steel wire shelving can be cut down to your exact measurements using a pair of boltuctters (available at £12.99) or a hacksaw. 

Our systems CAN be fixed to stud walls and solid walls with no problems, as long as they are built to standard building regulations.