Get your cloakroom cupboard or hall way organised easily with this simple package!
This design uses our SuperSlide shelving with our regular fix method.
With two full width top shelves for hats, gloves and other accessories, there is a hang bar below which spans the width of the enclosure.
To the left you can store long overcoats etc.
To the right a shorter section for jackets, kids coats and blazers etc. and two shoe racks below.
Please note, the images shown are for illustrative purposes only and may change slightly depending on the wall configuration you select. If you would like to see specific images for the package size & configuration you require, please let us know and we’ll be happy to email them across to you.
1.22m/ 4' wide enclosure - A 4' wide package will offer two 1.22m/ 4' wide shelves, 1.22m/ 4' of hanging space, and two shoe racks 61cm/ 24" wide which will hold 2 - 3 pairs of shoes each.
1.83m/ 6' wide enclosure - A 6' wide package will offer two 1.83m/ 6' wide shelves, 1.83m/ 6' of hanging space, and two shoe racks 91cm/ 36" wide which will hold 3 - 4 pairs of shoes each.
2.44m/ 8' wide enclosure - A 8' wide package will offer two 2.44m/ 8' wide shelves, 2.44m/ 8' of hanging space, and two shoe racks 122cm/ 48" wide which will hold 4 - 6 pairs of shoes each.
Our systems must attach to the back wall but will also attach to side walls if they are available. Our drawings are shown with both side walls but some people will not have these walls to fix to, and therefore we need to know which wall(s) are available so that we can send the correct components so that you can install your closet properly.
When ordering this layout we recommend that you have a minimum closet depth of 55cm / 22" to allow your clothes to hang properly and a minimum ceiling height of 216cm / 85" so that the garments on the rail not drape over the shoe storage.
Our systems CAN be fixed to stud walls and solid walls with no problems, as long as they are built to standard building regulations.