Our packages are a great way to get you started with ClosetMaid.
They include all of the shelving and hardware that you need to create a Pantry/ larder as illustrated in the design pictures above.
Packages are delivered flat packed, with assembly instructions, labelled hardware, and informative diagrams for easy installation.
This package uses ClosetMaid's CloseMesh style of shelving with Adjustable ShelfTrack Hardware.
The package will include:
6 x Full width shelves
84" Wall Standards
Select the position of the shelves to suit your storage requirements upon installation. Adjust the position as and when you need to simply by unhooking the support brackets from the track system and selecting a new position!
If your enclosure is less than 122cm / 4' wide you can trim the shelving down to suit your exact measurements with a hacksaw or boltcutters.
End Caps are provided to cover the ends of the shelves.
You can choose the depth of your shelving from the options above, as well as the wall construction which is required so that we can ensure we send you the correct hardware.
All ShelfTrack hardware is mounted to rear wall only, no side walls are required.
Stud Walls - We will provide toggle bolt hardware which does not require fixing directly to the studs.
Solid Walls - We will provide screws with anchors/ rawl plugs, you can also use these fixings with stud walls if you are fixing directly into wooden studs.
If using 30.5cm (12") deep shelving we recommend a minimum enclosure depth of 35cm (14").
If using 40.6cm (16") deep shelving we recommend a minimum enclosure depth of 46cm (18").
If using 50.8cm (20") deep shelving we recommend a minimum enclosure depth of 56cm (22").
If you would like to use a mix of the different shelf depths please contact our design team;
Email - firstname.lastname@example.org
Call - 01622 870 050