Pre-designed packages are a great value way to maximise your storage potential.
They include all of the shelving and hardware that you need to create a walk in wardrobe as illustrated in the design pictures above. Packages are delivered flat packed, with assembly instructions, labelled hardware, and informative diagrams for easy installation.
This package uses the ClosetMaid SuperSlide style of shelving, with Fixed Mount Hardware. The package will include:
2 x Long hanging sections for dresses and overcoats up to 35cm/ 14" wide.
1 x Shelf stack of four shelves up to 61cm/ 2' wide with freestanding drawer unit below. Suitable for flat and folded items.
2 x Two tier hanging sections for short garments. Top shelves will butt up to shelves installed on adjacent walls to create seamless storage space. SuperSlide corner hanger bars are used to connect hang bars from each wall, to adjacent walls to create uninterrupted hanging space across all three walls.
Freestanding drawer system is included in the price and comprises of one 8cm/ 3.2" deep drawer, three 18cm/ 7" deep drawers, drawer stops and a plastic moulded top for the frame which acts as a further shelf. The drawer system stands at 76cm/ 30" high, 50cm/ 20" wide and 58cm/ 23" deep.
If you have less than 2,44m/ 8' in either the width/ length dimension of your room, then you can trim the shelving down to suit your exact measurements with a hacksaw or boltcutters. This will allow you to create the perfect fit for your walk in wardrobe.
You can choose the depth of your shelving from the options above, as well as the front wall availability which is required so that we can ensure we send you the correct hardware. This layout utilises three walls to fix to; two side walls and the rear wall of the room or enclosure. Ordinarily there will be a fourth/front wall (which has been made transparent in the pictures for viewing purposes), but sometimes the room/enclosure configuration means that there may not be a front wall at all, or there may only be a return wall to fix to at one side. So that we send you the correct components to install your walk in closet properly, please make sure that you select the correct option, explaining the configuration of the fourth/front wall, as viewed from the outside of the space working from left to right i.e.:
Wall - Wall will indicate that you have both front return walls at each side of the closet to fix to.
Wall - Open will indicate that you have a return wall at the left hand side, but an open area on the right hand side.
Open - Wall will indicate you are missing a wall/ cannot fix to the return wall on the left, but you have a return side wall to the right.
Open - Open will indicate that you you are missing both return walls/ cannot fix to either return wall.
Bear in mind that once garments are on hangers they generally protrude between 51cm (20”) and 56cm (22”) from the wall.
If you are fixing onto the 'Front' wall please ensure you have a minimum return wall space of 14" (for 12" shelving) or 18" (for 16" shelving) to ensure there is enough room to fix the side wall brackets.