Our packages are a great way to get you started with ClosetMaid.
They include all of the shelving and hardware that you need to create a wardrobe as illustrated in the design pictures above. Packages are delivered flat packed, with assembly instructions, labelled hardware, and informative diagrams for easy installation.
This package uses the ClosetMaid SuperSlide style of shelving, with Adjustable ShelfTrack Hardware. The package will include:
1 x Full width top shelf for flat and folded items
2 x Two tier hanging section for short garments up to 0,91m/ 3' wide
1 x Shelf stack for flat and folded items up to 0,61m/ 2' wide
If you have less than 2,44m/ 8' then you can trim the shelving down to suit your exact measurements with a hacksaw or boltcutters. This will allow you to create the perfect fit for your wardrobe.
You can choose the depth of your shelving from the options above, as well as the wall construction which is required so that we can ensure we send you the correct hardware. All hardware is only mounted to rear wall. Note that hang bar position can be decided upon installation and for both shelf depths options, you can place the hang bar either at 25,4cm/ 10" from the back wall OR 30,5cm/ 12" from the back wall.
Stud Walls - We will provide toggle bolt hardware which does not require fixing directly to the studs.
Solid Walls - We will provide screws with anchors/ rawl plugs, you can also use these fixings with stud walls if you are fixing directly into wooden studs.