A key component of our Fixed Mount system.
- Supports front lip of 9" & 10" deep shelving and deeper shelf with 10" hang bar positions.
- Use 1 bracket every 36" along the shelf's length and at each 'open end' of shelf
- If supporting more than 3 shelves in a stack you could use a 1009 Shelf Support Pole instead
- Not for use with ShelfTrack system
- Note that the physical length of this bracket is 30.5cm (12") long
- Material: Epoxy coated steel
The 10" position shelf brackets are for use with the following:
Please note that the length of the actual bracket is NOT 10" (25.4cm). As the bracket sits at an angle, it is longer than the shelf depth that the bracket is used to support. Therefore if ordering any replacements or additional supports, please double check that you order the bracket based on the position and not the physical length of the bracket.
A 1162 (10" / 9" position) bracket is actually 12" (30.5cm) long.